HOT - PROLINK USAGE, TIPS & FAQ

PROLINK CHAIN LUBE - is a metal treatment, a super lubricant and a metal cleaner all in one.

Metal treatment means the molecules in ProLink penetrate the chain and invisibly bond to make all the chain's (or other metal component's) surfaces slippery smooth.  Apply as follows for a dry, clean and well-lubricated chain all year round.

It is desirable on the first application that the chain be clean, DRY, and free from solvents. You may use ProLink to initially clean the chain of other lubricants, dirt and grease and grime by pouring ProLink on the chain, rotating the cranks and wiping off the result.  Alternatively, you may initially clean your chain with a solvent, but ensure that the solvent is completely removed from the chain before commencing to apply ProLink for lubrication.

Upon obtaining a clean chain surface apply a wet coating of ProLink to envelope the chain whilst spinning the cranks backwards. Allow ProLink to penetrate the chain links.

Now allow the chain wet with ProLink to stand on the chain for a while (even overnight). This final step allows the molecules in ProLink to bond to the chain's surfaces.  The longer you leave ProLink on your chain in a wet state before wiping the chain dry, the more ProLink's molecules will bond with the chain and the longer and more satisfying ProLink will perform.

In WET or MUDDY conditions, you may apply ProLink before and especially after the ride to insure corrosion protection.

Because of the continued cleaning action of ProLink, it may be desirable to re-apply as traces of dirt and grime continue to be flushed out from between the pin and the roller of each link.

An amazing benefit of using ProLink is that after you have been riding and wish to remove any small particles of dirt or dust from your chain, you can simply squirt a little ProLink onto a rag, wipe it through the chain, while spinning the cranks backwards, and in 10 seconds flat all dirt will be removed from the chain, and you will have a completely dry, clean, smooth chain.

Thus there is no reason why you cannot easily and conveniently have a shiny, clean and smoothly operating chain 27-7, 365 days a year!

“Do I have to clean the chain before applying PROLINK?”

Absolutely not!   It’s true that the chain must be clean for PROLINK to work, but in fact, it is much better to use PROLINK to clean the chain. PROLINK will do as good a job of cleaning as other cleaners on the market yet will not compete with the “MFR” (Metal Friction Reducer) while it is treating the metal surface. This means that you clean as you lube the chain simultaneously. While other cleaners may clean between the pin and roller, they might also contain additives which could hinder the effect of MFR. PROLINK is a "one stop" total cleaning and lubricating solution for your chain and 100's of other metal surfaces where clean high quality lubrication is required.

“How long will PROLINK last?”

The answer depends on what type of riding you do.   Feedback indicates that you should ride 2-3 times longer between applications as compared with what you had been using.   This is based on what you determine to be the first sign that re-application is necessary, (i.e. squeaking, link binding, or that contamination begins to stick to the chain).  However, you should nevertheless get 100's of kilometers off silky smooth riding between applications if you apply it according to the instructions listed on this site.

“Is it possible to use too much PROLINK?”

No, since PROLINK contains no solids like Teflon, graphite, moly, or waxes to build up and get tacky, overuse is not possible.  Each application of PROLINK will add invisible friction modifying molecules to the surface of the chain and will in effect make the chain smoother in operation and more water resistant. By re-lubricating regularly you’ll appreciate the real advantage of PROLINK.

“Will PROLINK wash off when I clean my bike?”

Not if you just use just soap and water or a mild degreaser.   Remember, PROLINK repels moisture so rinsing off the bike is not a problem.   Avoid the use of solvent based degreasers.

“How does PROLINK perform around salt water?”

Our experience has been that PROLINK will perform as well as any chain lube on the market when it comes to rust prevention.   A salt water environment will simply require more frequent applications to ensure maximum corrosion protection.